People these days are unable to live without using cars. However, owning a car is not easy because apart from the money that you spend in getting the car, it is essential for you to spend some extra money on the different parts of your car. Repairing some of the problems in the car will help you in saving on diagnostic costs. Nevertheless, there are a lot of things that can easily be done if you have an idea about car issues and the tools for fixing such issues.
Content Route Here
What is a Tire Pressure Sensor Fault?
A tire pressure sensor fault is nothing related to low or high tire pressure. Instead, it is related to the powerlessness of the unit to perceive signal from not less than one wheel sensor. Here, it is important to note that if only one wheel sensor would be undetected or defective, there would be a message saying “XX tire pressure not monitored”.
In case of a Tire Pressure Sensor Fault, the message reads “Low Tire Pressure”. The failure of one of the wheel sensors or the breakage of the bands resulting in the floating of the sensor inside the car is a severe condition of your car and it requires immediate diagnosis and treatment.
Sometimes, it is even a small computer error that might get the message appearing on your screen. This issue requires re-programming of the tire sensor that has failed.
Dealing with Tire Pressure Sensor Fault
The first and the most important thing that you need to do in case you detect a tire pressure sensor fault is to take your car to the dealer or to a tire shop in your locality. These shops generally have hand held tools that can easily be placed against the sidewall of the tire.
These tools use RF signals for re-programming each TPS and this takes not more than five minutes and even less. If this procedure does not clear the issue, then it becomes mandatory for you to pursue other causes of this fault code.
Other Procedures of Resetting Tire Pressure Sensor Fault
There are some other procedures that can also be used for resetting the tire pressure sensor fault and they are as follows:
Verify the Tire Pressure Sensor System
If you have a car that makes use of a direct system, then it would be quite easy for you to reset the fault. What you need to do is just push the reset button that can be found on the dash or you can even follow the menu indicated in the owner’s manual.
In case, you have a car that uses an indirect system, then you need to reset it by making use of a scanning tool or a magnet that can be availed from the car dealer or can even be bought from the market. There are some systems with the reset button placed within the glove box. This reset button has to be pressed and then held for at least three seconds with the ignition on.
Inflate the Car Tires
You need to make sure that all the tires of your car are inflated properly. You need to keep in mind that the sensors are being set back to zero and therefore it is essential for all the tires to be inflated. Failing to do so will result in the inappropriate calibration of the sensors and even the readings will be incorrect.